60t Vs. 80t Tooth Saw Blade: Which Is Better?

There are so many choices in table saw blades! Are you also confuse between 60t and 80 T? Which one is best for you? Here, you will get to know the application about the individual one and the differences between both. These both are blades that are designed for woodworking. However, these blades work entirely differently and consist of some unique features. For instance, 60tooth blade helps cut more prominent areas, while 80 tooth is a suitable option for intricate cutting.

However, the main difference between both blades is that one has 60 teeth, and the other has 80 teeth. Indeed, the equipment with more teeth is more substantial as well as smoother. Moreover, it cuts the surface readily as compared to the equipment with a lesser number of teeth. Here you will compare both the type of blades in detail. In the following paragraphs, there are essential differences that might make your mind clear.

60t Vs. 80t Tooth Saw Blade

Application of 60T –

  • The instrument is suitable for cutting soft materials. It works excellent for delicate metals and plastics.
  • It is not an appropriate option for cutting heavy material since it requires large force or pressure.
  • The unique feature about 60 truth is, it produces motor courts without splinters.
  • It will do wonders if you are lubricating the tools. Thus, it maximizes its performance.
  • The tool with 60 blades do not cut thick material effectively.
  • Due to enough space, it does not make a good grip.

Application for 80t-

  • While using a blade with 80 teeth, you need not change your blade halfway into a project.
  • Due to the higher number of teeth, the blade will provide you with accurate results.
  • The blade with 80 teeth has fewer chances for breakage.
  • The equipment is more suitable for cutting thicker or stricter material.
  • The blades are done with Parma coating, which does not allow blades to get heat.

Differences between 60t and 80t-

Side clearance

The side clearance means the gap between each tooth in an instrument. For example, 60 tooth and 80 tooth blades have different side clearance. That means a piece of equipment with 60t has a gap of 0.08 inches, whereas 80 goes up with 0.13 inches. Therefore, during this drive, both of them work entirely differently from each other.

Of course, equipment with more teeth will tend to put more force or pressure on the material. That means 80t will help to cut down hardwood. At the same time, a table saw with 60t is responsible for the quite soft material. Although, softwood is fragile, and if it is not cut with proper care, your blade may break. For such types of things, you can go for 80 teeth table saw.

Gullet

The gullets are the spaces between the teeth. There are two types of equipment, one with 60 teeth and the other with 80 teeth. The very first thing is both of them are designed separately. Due to which their functions are wholly different. To be specific, 60t blades have a smaller gap between their gullets. In contrast, 80 tooth blades have a more significant gap.

Hence, due to the smaller gullets, an instrument with 60 teeth requires more pressure to cut material. That’s the reason it is more suitable for softer woods just because of the wider spacing. At the same time, the tool with 80 tooth blade requires less force to cut down the material. Both of them will cut down the material into the same depth but require different forces. The 80t is responsible for the material, which is more demanding. Therefore, it reduces the chances of getting a break in case if pressure is applied more.

Hook angle

First and foremost, the hook angle is the angle made by the blade from the wood. Indeed, it will be more challenging to set up the angle with a higher number of teeth. For making a clean-cut, it’s essential to adjust your upper rake. To get the best results, you have to fix it between 5° and 10°.

Antivibration slots

The fundamental objective of the antivibration slot is to reduce noise and vibration. As the object is more powerful, it is more likely to generate noise that will cause trouble in your ears. So, when getting your hands on the table saw, it’s not always necessary to look at the number of teeth. The most important thing to consider is also antivibration slots. It reduces the chances of noise that do not cause frustration and also provides ease of work.

Which one is better-

The main difference between a table saw with 60 teeth, and 80 teeth are the Number of teeth per inch. A piece of equipment with more teeth is more robust as compared to the other one. The fundamental purpose of a 60tooth blade is expected that is for cutting material like wood or plastic. Undoubtedly, the equipment is responsible for dealing with most of the projects. However, do not offer smooth cuts as compared with 80 tooth blades.

80t blades are specifically made for cutting hardwood and metals. Because of the greater Number of teeth, it is responsible for cutting the material, which requires greater force. Although, comparing quality and durability is also important to consider one table saw for your purpose. For fulfilling your purpose, it’s imperative to produce high-quality cuts without errors.

During this drive, you have to select equipment properly by looking at the material. At last, when it comes to selecting the best tool, it is pretty challenging since both of them have their own merits and demerits. According to your purpose and looking at the instrument’s capability, you can get your hands on the best one!

Conclusion

60 tooth and 80 both have their applications, drawbacks, and capabilities. It entirely depends on the type of project you want to complete. Also, if you want to complete and get help for various projects, then a 60t blade is the best option to go. While, if you are looking at the instrument for more power, then 80 tooth is outstanding.

Related Topics To Read:

Reply