, ,

The Best Circular Saw Blade in 2022? Here’s Our Top Picks

Top 10 Best Circular Saw Blades 2022

If you’re looking for the best circular saw blade for your circular saw you’ve come to the right place. Because as we know, the performance of your circular saw depends on the blade. Whether cutting a board to size or making a cut in a piece of metal, having the right blade can make your job a lot easier.

So, not only do we want a great quality blade, we need to consider what material we’re going to be cutting. Whether that be wood, metal, plastic, just to name a few. So, where do you start, considering all the options…?

Well, you start here of course, reading which is the best circular saw blade for you and your requirements.

The Best Circular Saw Blade? Here’s Our Top 7

Firstly, there are several important points to consider while picking up a new circular saw blade. As a result, we have created this buying guide you can follow to get the blade for you.

The blades below have been meticulously picked because we think they are the best out there. We’ve listed their features and pros and cons of each one. That said, let’s get down to business….

#1. Evolution 5-⅜” Steel Cutting Saw Blade

 

Evolution Power Tools 5-3/8BLADEST Steel Cutting Saw Blade, 5-3/8-Inch x 30-Tooth

Check Latest Price

 

This Evolution Power Tools steel cutting saw blade is perfect for making clean, accurate cuts in a variety of materials. With 4200 RPM and 20mm arbor size, this blade is designed to work with Evolution saws or other low RPM saws. The 30 carbide teeth provide a 0.063-inch kerf for smooth, precise cuts, while the titanium coating helps to extend the life of the blade.

Pros

  • It last 2x longer than most blades
  • Super smooth operation and clean cuts
  • Doesn’t make too much noise

Cons

  • Not good with plunge cuts

 

#2. Freud D0740A Diablo 7-1/4 40 Tooth Saw Blade

 

Freud D0740A Diablo 7-1/4 40 Tooth ATB Finishing Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating

 

Check Latest Price

Freud D0740A Diablo is a finishing blade designed to make smooth, razor-sharp finish cuts in wood. The 40 alternate top bevel (ATB) teeths on this Freud blade are set at 15 degrees, which produces smooth and fast 0.059″ kerfs. This thin kerf design allows the saw blade to cut more efficiently without bogging down the motor or burning out the saw’s bearings.

They stay sharp up to four times longer than standard carbide because Freud’s exclusive TiCo Hi-Density Carbide formula is shock-resistant. It’s also got a non-stick coating called Perma-Shield that protects it from heat and corrosion.

Pros

  • Amazing cross cuts
  • Laser cut stabilizer reduces friction and noise
  • Requires next to zero sanding

Cons

  • The actual diameter is 7.125″, not 7.25″

 

#3. DEWALT DWA161240 6-1/2-Inch

 

DEWALT DWA161240 6-1:2-Inch

Check Latest Price

This DEWALT circular saw blade features a reinforced shoulder for increased impact resistance in nail embedded wood. Its thin kerf design allows for smoother cuts and less material waste, while the tough coat anti-stick coating reduces friction and gumming.

It is ideal for cutting wood, plywood and composites. The reinforced shoulder area allows the blade to withstand repeated impact loading from nails, screws or bolts in wood while delivering top performance.

Pros

  • Usable with both corded and cordless saws
  • Minimises splintering
  • Handles kickbacks from nail embedded lumber

Cons

  • Consumes battery quickly for cordless saws

 

#4. PORTER-CABLE 12057 4-1/2-Inch Circular Saw Blade

 

PORTER-CABLE 4-1:2-Inch Circular Saw Blade, Plywood Cutting, 120-Tooth (12057)

Check Latest Price

The PORTER-CABLE 4-1/2-Inch Circular Saw Blade is perfect for anyone looking for a seamless, top performing blade within a budget.

With its sharp teeth and accuracy, the blade can cut through a variety of materials quickly and easily – giving you clean, sand-free edges in a shorter amount of time. Made with steel and 120 teeth, the blade is perfect for intricate designs and applications.

You can rest assured it’ll deliver a seamless, top quality cut. It’s definitely in contention to be the best circular saw blade of this year. Although they advertise it as an expert plywood cutter, they are also efficient at dealing with vinyls, hardwood, melamine coating.

Pros

  • Sand-free finish
  • Fits in any 4-½ inch blade that has ⅜ in arbor
  • No splintering
  • 120 teeth, more than many competitors

Cons

  • The teeths can get dull after a while

 

#5. WEN BL1060 10-Inch 60-Tooth Professional Woodworking Saw Blade

 

WEN BL1060 10-Inch 60-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws

Check Latest Price

With a 5/8-inch arbor, a 1/10-inch kerf, and up to 6000 RPM, this blade can slice through even the toughest wood with ease.

The ultra-thin kerf provides clean and efficient cuts, while the 60 carbide-tipped teeth provide a fine finish on all your woodworking projects. Out of all the 2.4mm saw blades, this one seemed to have the most efficacy. Watching it cut through maple, oak, and veneer plywood made me feel like I was peeling off skin from an orange.

Pros

  • Great for delicate woodworking
  • Easy installation
  • Ultra-thin construction


Cons

  • Vibrates a lot

 

#6. GRAFF SPEEDCUTTER

 

GRAFF SPEEDCUTTER 5 Wood Carving Disc

 

Check Latest Price

GRAFF SPEEDCUTTER is a new generation, universal carving tool suitable for polishing, grinding and cutting non-metal materials & all kinds of wood.  Taking advantage of laser sharpening and quality instrumental steel, the teeth are made of tungsten carbide and are made of hard metal (Tungsten Carbide).

Graff Speedcutter is designed to work with angle grinders, drills, and other power tools with 5/8″ or 8 mm arbor hole diameter.  It can make short work of large-sized pieces at a jiffy with it’s high speed and rotation. But beware, this is not a tool for beginners. 

Pros 

  • Great for sculpting, shaping
  • High rotation [12200 RPM]
  • No overheating

Cons 

  • Despite claims, there are severe kickbacks

 

#7. COMOWARE 7-1/4 inch Circular Saw Blades

 

COMOWARE Circular Saw Blades 7 1/4 inch - 40 Tooth ATB, Premium Tip, Anti-Vibration with 5/8 inch Arbor Light Contractor and DIY General Purpose for Wood, Laminate, Veneered Plywood & Hardwoods

 

Check Latest Price

Comoware is the last circular saw blade on this list. Made with a unique VC1 tungsten carbide tip and an anti-vibration design, this 7-¼” blade is perfect for anyone looking for superior performance and extended blade life.

The large 80-teeth design also allows for easy chip removal and heat dissipation, making your projects easier and safer to complete. Plus, the 5/8″ diamond arbor fits into both round and diamond hole blade machines, making them stable and versatile in use.

Pros 

  • Anti-vibration design
  • ATB style provides maximum efficiency
  • No chipping or gumming

Cons 

  • Not for heavy duty

 

How To Choose The Best Circular Saw Blade

Choosing the right circular saw blade is important to experience the desired performance. When it comes to buying a new blade, you need to consider several points to get the right tool for you.

So we have listed the important things to consider while buying a circular saw blade in this detailed buying guide for your convenience…

Consider The Material

While buying a new circular saw blade, the first thing to consider is the type of material you are going to cut. Whether you are going to cut wood, plastic, plywood, or metal, make sure you get the right one for the job.

Size

The size of the blade is another important point. Circular saw blades come in different sizes for different purposes. Bigger size blades are ideal for heavy applications, and smaller size blades are ideal for lighter applications.

Also, the circular saw blade needs to fit in your saw to cut the materials. So, make sure to check your circular saw so that the blade you choose is right for your saw.

Arbor Size

If you buy a circular saw blade that doesn’t fit your saw, then that is of no use for you. So, next you’ll need to consider the arbor size of a blade. Usually, the arbor size of the circular saw blades can vary from 3/8 inches to 1 inch according to the size of the blade and saw.

Number of Teeth

The number of teeth on a circular saw blade plays an important role in cutting performance. Usually, these tools use small teeth to cut finer. A general rule of thumb, the more teeth, the finer the cut.

Construction

Circular blades are used for numerous applications and get plenty of wear and tear. So, if the blade is not durable, then it may break. Therefore, make sure it’s made out of high-quality material and can last for a long time. 

How to Change your Circular Saw Blade

If you’re using a circular saw, sooner or later you’ll need to change out the blade for a new one. However, changing the blade can be difficult for you if it’s your first time. The step-by-step guide will show you how to replace a circular saw blade with a damaged one safely…

1. Turn off the Saw Machine

The first thing you need to do is that turn off the power supply. It is important to take safety precautions while you’re handling saw during the alternation. This step is essential to prevent the risk of injuries. No matter if you’re an experienced worker or not, you alway need to consider safety.

2. Eliminate the Arbor Bolts

After disconnecting the electric supply, place your saw on a flat and safe surface. Look for the lever, knob, or locking button. Make sure, when you’re moving towards the blade, these safety elements are activated. They will ensure not to harm you also help you to press the blade change key during the process. Some saws do not have safety locks, in such a case pushing the blade into a wooden surface will suitable option for keeping it firm.

3. Pull the Worn Blade

To loosen the arbor nut, use a wrench. Start moving your hand in the counterclockwise motion until it removes. Additionally, for removing the arbor bolt, you can use the key that comes with your saw. Moreover, you can check the manual of your tool that is given by manufacturers with the product. Next, slide the blade if the nut is unscrewed.

4. Change with a new one

Slide the new blade onto the shaft, but remember which directions you follow to change the previous blades. Thus, new blades should be placed correctly. Most of the saw comes with directive arrows that indicate the right direction to fixed the nuts.

5. Place the arbor nut

Once the blade is placed in a suitable position, you have to fix the holding ring and fix the bolt with your wrench. All nuts and bolts must fix tightly to make sure no injuries will cause when cutting.

Frequently Asked Questions 

    

What type of circular saw blade should I use?

There are multiple types of blades available, and you should use them according to your need. The different types of blades available are Plywood Blades, Ripping Blades, Crosscutting Blades, Combination Blades, Fine-Tooth Blades, Hollow Ground Blades, Dado Blades, Thin Kerf Blades, and Finish Blades. You should check what type of project you are planning to do, and depending on that; you can choose the set of blades. Ensure that you are using the blade only for its intended purpose; otherwise, you may not get the desired finish.

Can I sharpen my circular saw blade?

Yes, you can sharpen the blades of your circular saw. This trick certainly saves money in the long run. By sharpening the blades, you will get better cuts, and you will also reduce the frequency of the replacement of the blades. You can use a file to sharpen the blade’s teeth, but you need to ensure that you do not mess the teeth’ angle. Moreover, remember that carbide is very hard & you might need a diamond sharpener for such blades. You can even opt for professional blade sharpening services, and these services are worth it.
 

Are more teeth on blades better?

The number of teeth on the blade determines the finish and the speed of the cut. It is known that the blades with a higher number of teeth enable you to get a finer finish, while the blades with a fewer number of teeth will give you a somewhat rough finish. However, if you are cutting large lumber pieces, you must use blades with fewer teeth. Depending on the purpose, you must choose the Teeth per Inches configuration. Moreover, ensure that your blades have gullets and expansion slots as well.
 

What should I do with the old circular saw blade?

If you have old blades that you do not plan to use or blades that can’t be sharpened again, then our advice is to save them for the future. You might even have some cheap blades which are not worth sharpening. In such a case, you can keep them for work, such as demolition work. You will even be able to use these old useless blades for cutting through lumber that might have nails in them. These are the two uses of the old blades, which are of no use to you.
 

How can I cut the plywood with a circular saw without splintering it?

To avoid splintering of plywood, ensure that you are using the appropriate blade for cutting the plywood. In addition to this, ensure that the blade is sharp enough to remove the material without any issues. While cutting through the plywood, you must also check if the plywood’s good face is closer to the blade’s outside edge. If you are still getting splinters, you can add a strip of masking tape on both sides, and you can cut over the tape. This trick works like magic.
 

How can I use a circular saw without a table?

To use the circular saw without a table, you can start by getting pressure treated plywood. Once you have it, you can fir your saw with the edge guides,which will help you get a straight cut. Now, ensure that you have set the depth of the blade according to your need. You would now need to place the unused woods on the sawhorse, and you can proceed with the use of a circular saw without the table.
 

Conclusion

So, there you have it – the best circular saw blades on the market today. When choosing a new circular saw blade, anyone can get confused as there is a lot of things to consider. Here we’ve reviewed 7 different blades and shared our opinion on each one. Hopefully, this will help you pick the right blade for the job. 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply