Top 3 Picks
|Buy at Amazon||Buy at Amazon||Buy at Amazon|
In a wood workshop, a lot of work is now dependent on power tools. These electric tools make things very quick for you. There are still some tasks that require a high level of precision, and the electrical tools might not serve the purpose. In some cases, you will need to use a handheld saw designed to cut or trim the veneers. You would have guessed it by now, and you are right if you thought that we are talking about veneer saw. The design of the veneer saw is simple. It has a flat surface with teeth on its edges, and these teeth help you in cutting through the veneer. Since the blade is thin, the kerf is also minimal. The usual configuration of the saw has 20 teeth per inch, and they are very sharp. Veneer saw an inexpensive tool that you can use to get neat and precise jobs while working with the wood. Many people try using a utility knife as a replacement of a veneer saw, but the problem with the utility knife is that it is a lot thicker. Moreover, the utility knife may not have the teeth to cut the veneers easily. Using the veneer saw is very easy, and once you start using it, you will realize how easy the saw makes it for you to cut through the veneer.
Best Buy Veneer Saw Reviewed For 2022
Another feature of the veneer saw is that it has teeth on both sides of the blade, and this helps you in using the veneer saw at any angle. The repositioning of the blade is easy, and it adds more utility to the tool. There are many variants available in the veneer saw, and many brands manufacture it too. If you are planning to buy veneer saw, you would need to access the features carefully and choose the one that offers a better utility. In this article, we have listed some of the best veneer saws available in the market. You can go through the eight models listed below and buy one of these. Let us move on to the next section and explore the best veneer saws available in 2022. Do not forget to check out the reviews and advantages of each of these products.
#1. Kunz Veneer S
The first saw on our list is from Kunz, and this is one of the best-selling veneer saws available in the market. The saw comes with a cranked handle to make it easy for you to use saw. It is also very easy to use this saw against any kind of straight edge, and the sharp blade helps you get a precision cut. This veneer saw has 16 teeth per inch, and it has a kerf of just 0.020 inches. The narrow curve is yet another factor that will make a lot of difference for you while using the veneer saw. This saw has a triangular tooth pattern, enabling you to cut the veneer with push and pull strokes. The blade of this veneer saw is slightly curved, and this curvature gives you the required flexibility while you are using the cut lines. The total blade length of this saw is 3 inches, and the overall length of the saw is 7.75 inches. Since the blade is small, you will be able to use it easily, even for smaller projects. In addition to this, the grip is designed with hardwood, and it is big enough to allow you to work comfortably with the saw. Do not worry about the quality of the saw as it is designed in Germany. The double edge blades are going to retain the sharpness for a long time.
- This veneer saw has a 3 inches blade with a total length of 7.75 inches.
- Triangular teeth of the blades are easy to use, and it ensures that you do not have to exert any pressuring while using the veneer saw.
- It is available at an affordable price.
- Left-handed people may find it difficult to use the saw because the angles are needed for right-handed people.
Also Read: The Best Circular Saw Blade
#2. Two Cherries 520-2200 Veneer Cutter
If you are concerned about the quality of the veneer saw, we recommend you buy Two Cherries 520-2200 Veneer Cutter. It is one of the easiest to use veneer saw that you would find in the market. The saw helps you in cutting a perfect edge that would help you in joining the veneers precisely. Some people are not very comfortable using the veneer with push strokes, and they prefer to pull strokes. This veneer saw is designed to work with pull stokes. Another good feature of this saw is that it has a curved blade. The curved blade would enable you to start cutting the veneer from the middle. The blade of this veneer saw is very sharp. You will be able to use it to cut the single sheet, and you will also be able to use the veneer saw for cutting multiple sheets of the veneer. This feature allows a greater utility, and it enables you to get a more precise joint. The blade in this saw has 18 teeth per inch, and the teeth are on both sides of the saw. You can use the veneer saw against an edge, and it will work the way it should. The total weight of the saw is 4.8 ounces, and the blade is made of steel. The handle is designed with wood, and it is a tight fit. Even after long-term usage, the handle would not break or become loose.
- The blade of the saw is made of steel, and it has 18 TPI configuration.
- The saw is very precise, and the handle of the saw is made of good quality material.
- The saw leaves a clean and smooth cut.
- You might need to tune it a little before you can use it.
#3. Crown 187V Veneer Saw
At number 3, we have a veneer saw from Crown Store. It is an exception quality saw that is manufactured in England. The saw is not manufactured in China, and this is one of the best advantages of buying the saw. Triangle edges of teeth have been sharpened on both sides; this enables you to cut the veneer via push & pull strokes. Such a design enhances the utility, and it makes it quick for you to cut the veneer. Moreover, you can also choose to use only pull or only push action. The blade adds versatility to the tool, at it is possible for you to use the veneer saw even if you are left-handed. The main blade is designed with high carbon steel, and it has been sharpened to get the perfect finish. The beech handle on this veneer saw is very ergonomic. It not only provides you the right grip, but it enables you to use the veneer saw very precisely. The blade of the veneer saw is 3 inches, and it has 15 TPI configuration. If the blade loses its sharpness, you can sharpen it again, just like any other standard blade. The overall length of the saw is 8.5 inches. The weight of the saw is 4.2 ounces, and all these features make it comfortable for you to use the saw. If you want more information about this product from the Crown store, you can click on the product link listed above.
- This veneer saw is designed and manufactured in England, and hence there are no quality concerns.
- The blade can be sharpened again, and it is made of high carbon steel.
- The blade helps you in cutting veneer through push and pull strokes.
- Nothing that we could notice.
#4. Pax / Taytools Thomas Flinn Veneer Saw
Here is another veneer saw that is manufactured in England. This veneer saw is made by Thomas Flinn, and he is one of the last traditional saw makers in England. The quality is the best that you can get, and the traditional design looks great. The saw has a kerf of just 0.022 inches, and this helps you in getting a smooth as well as controlled cut while you are using the saw. The length of the blade is 3 inches, and the width of the blade is 2 inches. In addition to this, the blade has 15 TPI configuration. The handle of the saw is designed with solid walnut, and it has a diameter of 1.25 inches. The length of the handle is 5 inches, and you will find it easy to hold the handle. The material used for making the blade is high carbon alloy steel. It is a durable choice for the material, and it is also easy to sharpen again. Moreover, the blade doesn’t lose its sharpness easily, so you get all advantages with this saw. The walnut wood handle doesn’t get spoiled, and it has a very long life. The handle has been polished to give it a shiny finish. The teeth on the blade are made with very durable material, and hence you would not have to worry about breaking it or damaging it. The brass cap on the wooden handle improves the durability and stability of the saw.
- Thomas Flinn manufactures the saw, and he is the oldest traditional saw maker in England.
- The kerf of the blade is just 0.022 inches.
- The blade is made of high carbon steel, and the handle is made of solid walnut.
- There are no cons associated with this veneer saw.
#5. Deer Brand Veneer Hand Saw
Here is one of the most premium veneer saw available in the market. This saw is manufactured by Deer, and it has an offset blade that can be used to cut against a straight edge. The handle doesn’t interfere when you are using the blade. The teeth of the blades are designed so that the left-handed & right-handed people can use it. It is possible to use the saw with push and pull strokes as well. The tear out of veneer is not something that you will experience if you buy this veneer saw. The sharp blades ensure that the veneer doesn’t tear. The blade has a slight curvature, which enables you to cut the veneer from anywhere. Apart from this, the blade of this veneer saw has 13 TPI. The blade’s total length is 2.875 inches, and the kerf of the blade is 0.020 inches. The thin kerf is also an add-on that you get when you buy the veneer saw from Deer. The thin kerf is achieved because of the teeth setting without the set. The handle of the veneer saw is made of solid wood, and it adds stability to the hand saw. Apart from this, you will be able to use the veneer saw for flush sawing or vertical sawing. The size of the handle is 4 inches, and it enables you to get better visibility while you are using the saw. Overall, it is going to be a worthy purchase if you do not mind spending a little extra on veneer saw.
- The saw has a kerf of just 0.020 inches.
- The saw can cut in pull and push action. It has a handle size of 4 inches.
- The blade of the saw is very durable, and you can sharpen it as well.
- This veneer saw is slightly expensive when compared with other models on the list.
#6. Rockler Veneer Saw
At number 6, we have a veneer saw from Rockler. This veneer saw is very sturdy, and it also features a double edge blade. The saw doesn’t bend because of the sturdy blade, and it doesn’t lose sharpness as well. Both sides of the triangle teeth have sharp edges, and hence you can use it for push and pull strokes while cutting the veneer. You can even go ahead and use the veneer saw with a left hand. If the blade loses sharpness because of the long term usage, you can sharpen it again. It takes just a few minutes to sharpen the blade. Rockler uses high carbon stainless steel to manufacture the blade of this saw. Moreover, the brand also provides extra blades to the people who need it. This way, you are saved from the expense of replacing the whole saw. These extra blades are available for the purchase. The handle is designed with hardwood, and it is quite ergonomic. The blade is double-edged, and it gives you a clean cut every time you try and cut a veneer using the saw. Overall, this veneer saw is quite reliable, and you can opt for it without any concerns. If you want to check out the detailed specs or the pictures of the saw, you can click on the product link listed above. The page will have all the required information.
- The saw has a sturdy double-edged blade that is made of high carbon steel.
- The blade is replaceable, and it is available for purchase.
- The handle is made of solid wood, and it offers you a nice grip.
- Some left-handed people find it uncomfortable to use it.
#7. Irwin Jack Veneer/ Floorboard Saw
Moving on to the next item on our list, we have a multi-purpose tool that you can also use as a veneer saw. We are always in favor of versatile tools, as they can help you deliver a lot of work at no additional cost. This saw has a shallow blade, and it can be used as a veneer saw or as a floorboard saw. It has a round nose, and hence this saw can be used for crosscutting and miter work. You can even cut PVC, floorboard, and other similar items with this saw. The handle has a soft grip, and you can use it even with just one hand. The handle also absorbs the shock while you are cutting hard material. Irwin has been very critical about the safety of the users, and to make the veneer saw safer, it has a screwed handle assembly. The handle is designed with a combination of plastic and rubber. The total length of the saw is 325 mm, and it is good enough to deal with any task. If you purchase this veneer saw, then we assure you that you will get a smooth finish while using the saw. It should be noted that the saw is slightly heavy as it weighs 9.9 ounces. Apart from that, there is no such concern that we see while using the saw.
- It is a multi-purpose saw that can be used as a veneer saw, or a floorboard saw.
- The kerf of the saw is thin, and hence it offers precise as well as smooth cuts.
- It is one of the most affordable saws on the list.
- Some users reported that this saw needs to be sharpened again before use.
#8. Lynx Professional Cut Veneer Saw
If you are looking for a veneer saw with a single side edge, you can check out this option from Lynx. This veneer saw is 12 inches long, and it has a configuration of 11 teeth per inch. You can use the saw to cut thin as well as thick materials. It can cut through veneers, plastic, plywood, and even laminates. The sharp edge ensures that the cut is smooth and precise. It has shallow teeth, so even beginners would not face any issue while using the saw. Apart from all the materials listed above, you can also use it to cut through PVC. The nose of the saw has been rounded to make it safer to use. It can also be used for pocket cuts because of this rounded nose. The ground tooth has a three-sided design form, and it ensures an excellent result even when you are cutting against the grain. If you are using the saw on wood with the grain, then also you will not encounter any issue. The saw has a 2 component handle, which makes it easier to use it. The handle uses plastic and rubber, and it is screwed onto the saw blade. If you are purchasing this saw, you will notice that it comes with a reusable plastic tooth protector, which helps the saw in retaining the sharpness for a long time.
- The saw has a shallow blade design with three-sided teeth.
- It can cut through a variety of materials, and it offers a smooth result every time.
- The saw comes with a reusable plastic tooth protector.
- Nothing that we could notice.
How To Choose The Best Veneer Saw
Veneer saw is more of an expert saw, and hence a lot fewer people use it. If you are planning to try your hand on the veneer saw, then the first thing that you need to ensure is that you buy a reliable veneer saw. In this section, we have listed some of the points that you need to consider while purchasing a veneer saw.
Start by looking at the sharpness of the veneer saw. The problem is that most of the veneer saws will lose the sharpness after using it for a long time. You must look for a veneer saw that stays sharp after regular use. You will have to certainly sharpen the veneer saw once in a while but ensure that the material is good and it doesn’t need a lot of maintenance.
Teeth per Inches
You also need to look into the configuration of the veneer saw. As per the standard configuration, the veneer saw will have approximately 20 teeth per inches. There are different variants available in veneer saw with a variable number of teeth. You can go ahead and purchase the veneer saw with the configuration that you need.
Veneer Saw is a handheld tool, and hence you must look for a lightweight veneer saw. If the saw has a higher weight, then you might end up with a cramped wrist. Along with being lightweight, the saw should also be compact. All these features will help you with higher agility while you are using the veneer saw. This feature will help you in ensuring that you get precise cuts while using the saw.
Ideally, the blade of the veneer saw is quite thin. If you are looking for a veneer saw, ensure that you check the thickness of the blade. This feature will help you in ensuring that you get a proper performance while using the blades. Do not buy a veneer saw that comes with a thick blade. It will not serve the purpose when you are working with it.
You must also look at the grip of the veneer saw. A wooden grip is a good choice as it will offer you with the required control and precision. Ensure that the grip is not too large, and it should not be soft either. You might not get the feel of material while using the saw with a soft grip. An ergonomic handle is a must for using a veneer saw.
Veneer saw is a handheld tool, and it doesn’t have any moving parts. What you need to ensure is that you check the price before making the final purchase. The cost of the veneer saw should be reasonable, and it should not be very expensive. Find something near the median and ensure that the saw is not overpriced. Our recommendation here is to avoid the cheap veneer saw as they can be of inferior quality. A bad saw can mess up with the hard work on your project.
How to Sharpen a Veneer Saw?
Having a sharp saw makes it easy for you to work with the materials, and we don’t want you to struggle while trying to sharpen your veneer saw. To help you with the process, we have shared the steps that you can follow to sharpen the veneer saw.
- You can start by beveling the blade with the help of a water stone or an oil stone. The result of the process should be a square cut on a side and a bevel on the other side.
- In the next step, you need to hold the blade between the inside edge of the index finger and the thumb. Angle it at 15 degrees and strong the blade across the stone to sharpen it. The sweeping arch motion will help you bevel each tooth on the saw. This step is kind of time consuming.
- In the next step, continue the process listed in step 2, but you need to be very careful. You should not file the tips of the teeth and keep touching the teeth to ensure you are not damaging the veneer saw. The teeth of the veneer saw should prick you when you are touching it.
- After you have completed the bevel process, you need to hone the backside of the blade with water stone or oil stone. This step will help you improve the quality of the cuts drastically. Ensure that the edge of the veneer saw is very sharp, and this will help you cut the veneer like a hot knife cuts the butter.
Veneer Saw Frequently Asked Questions
I have never used a veneer saw and never seen anyone using it, is it easy to use? Shall I purchase one?
Yes, out of all the types of saws out there, a veneer saw is one of the saws that is less complicated to use. However, you should ask some experts or people who have already used the saw how to use it and basic tips and tricks. If you don’t know anyone like that, Google and find out.
Is it possible to sharpen the veneer saw? Does re-sharpening destroy the saw?
Of course, it is possible to sharpen the veneer saw. Unlike most of the other saws on the market, the veneer saw is one among the manual saws that could be re-sharpened and used. No, every veneer saw is designed in such a way that it could be re-sharpened several times. However, after a long cycle of re-sharpening, the saw could lose its features and become inefficient for any more use.
How to sharpen veneer saw? Is there any special way to do it?
There are two ways of sharpening a veneer saw. First, if the veneer saw is held perpendicular to a table or surface, use a fine file to sharpen the teeth’s, on the other hand, if the saw is lying flat on a surface or edge of a table, you should file a bevel on to the outside edge of the saw blade so that each of the teeth on the blade could be sharpened.
Instead of a veneer saw, is there any other saw or blade that could be used to cut the veneer?
Yes, of course, there are alternatives to veneer saw to cut a veneer. But, you should understand that the cut finish might not be the same as that offered by the veneer saw. Rotary cutter loaded with wood cutting blades are best for cutting veneer instead of veneer saw.
Why do a veneer saw have their handle attached at an angle to the head?
Have you ever used a veneer saw? Do you know how to use it at least? The purpose of the angle could be understood only if you have used the saw at least once, or seen anyone using it in the right way. The handle is placed at an angle to the head is to serve the purpose of cutting.
I have a lot of veneers to cut, I prefer using my utility knife to cut it, however, my friends recommended to use a veneer saw instead, is it true that veneer saws offer greater advantages over utility knife?
Yes, veneer saws offer more advantages in cutting veneer than using a simple utility knife. If you have already have used a utility knife to cut the veneer, you must have noticed that the cuts produce irregular edges that needed to be corrected afterward. However, when it comes to using a veneer saw, it could cut the veneer at a 90-degree angle with proper edges. This proper edge would make it easy to butt two pieces with ease.
It is possible to cut a very thick veneer using a veneer saw?
Yes, a veneer saw could be used to cut veneer of any thickness in theory. However, if the thickness of the veneer is too large, then using the veneer saw is not that easy. It is not impossible, but, complicated as the user needs to apply more tension and maintain a proper angle.
Is it true that using a veneer saw does not leave any splinters?
Yes, most commonly, using the veneer saw in the right way does not leave any splinters. However, if the saw is used improperly, splinters could be formed. Use the veneer saw in the right way and you will not have any splinters.
After checking out all this information about the veneer saw, we are sure that you will be able to buy it without any hesitation. Remember that veneer saw is more of an expert saw, so you might need some practice before you can use it as per the intended use. It is always better to try and practice using veneer saw on a draft project instead of using it directly on a production project. You can also visit the product page directly if you need more information about any of the saws that we have listed. The page will give you the detailed specs, and the details of the deal available on the veneer saw that you are planning to buy. Thank You.
For More Saw Visit Links Below:
- Best Buy Veneer Saw Reviewed For 2022
- How To Choose The Best Veneer Saw
- How to Sharpen a Veneer Saw?
- Veneer Saw Frequently Asked Questions