, ,

How To Sharpen a Chain Saw

ORCISH 52cc 2-Cycle 18-Inch Gas Powered Chainsaw

Chain saws can be used in multiple ways. Whether you are a professional or a homeowner, these saws can be extremely handy for cutting wood. And though they are extremely effective when they are sharp and new, with time, the blades, like the other saws, fade away. And frankly speaking guys,using a chainsaw with faded blades is not only dangerous, but it also degrades the performance of the saw. So, if you are experiencing slight degrade in the performance of the chain saw, you should consider re-sharpening the chain saw blade or changing it.

Chainsaws

In the article, we are going to talk about the step-by-step guide of sharpening the chainsaw blades. So, if you are looking to enhance the performance of the chainsaw and are after sharpening the saw blade at home, this article will be a worthy read for you.

How effective is the chain saw blade sharpening

Most chainsaw owners often think that re-sharpening the chainsaw blades is an impossible task to perform. This is mainly due to the scary look blades of the saw. However, if you have the right tools with you, you can easily do this at home without facing any major difficulty. Don’t worry, we are here with you with a detailed step-by-step guide that can help you sharpen the chainsaw blade at home.

A step-by-step guide to sharpening the chain saw

Step 1: Set the file so that the saw stays stable while working

The first thing to do while re-sharpening the chainsaw is to place it on stable ground. You can use a tabletop clamp. This will help you to work on it easily without worrying about the saw moving from its place.

Step 2: Tight the chain by adjusting the tension screw

Next, once you have secured the movement of the saw, now it is time to make that the chain doesn’t move while working. For this, you need to find the chain tension adjusting screw. Adjust it to the max level so that your chain doesn’t move while sharpening it.

Step 3: Mark the tooth so that it is visible while re-sharpening the blade

The next step is to make the markings. This will help you to work systematically and you won’t over-sharpen the teeth of the chain. This will also help you work reliably while working through the chain.

Step 4: Select the right file to work on the chainsaw’s teeth

A round file with the same diameter size as the chain teeth is the best one to go with for re-sharpening the chainsaw. So, choose the right file accordingly.

Step 5: Slide the file across the tooth of the saw so that every single tooth of the saw gets sharp

Normally, a tooth will require 4-5 moves of the round file. Make sure that you don’t overdo the sharpening as it can affect the working and balance of the chain.

Step 6: After every single tooth is sharpened, check the alignment of the chain and remove it from the clamp.

Remove the chainsaw from the clamp and check it with a sample project to check whether the chain is sharpened perfectly or not.

These were the six steps that you need to follow to re-sharpen the chainsaw. Be sure to work patiently as things may

Conclusion

So, this was the step-by-step guide that can help you achieve a sharpened blade for the chainsaw. IF you are experiencing dull blades or your chainsaw is sticking in the wood, it is the right time to check the blades and re-sharpening them. Follow the above-listed steps and get the right tools for sharpening the chainsaw blade and you can enhance the overall life of the blades.

Related Topics