The ideal cut you are searching for won’t be possible if the miter saw blade is not properly maintained. Because of the amount of time you spend using the miter saw, the blade gets hard & blunt. It is necessary to hone the blades, this way the edges, that turned curved, will be able to cut wood fast and effortlessly in the future. Refining a blade doesn’t even need a lot of effort. Getting back to work after finishing the sharpening will take you no more than 15 minutes.
Causes of blunt blades
The most common reason for a blunt blade on a miter saw is because it is used too frequently. When subjected to prolonged use, the material degrades rapidly. For those of you who are new to the industry and are unsure of what a blunt blade looks like, you have come to the right place!! Taking a look at the forms of the miter saw blades will help you determine whether or not they are dull. The blades should be sharpened if they appear round and far less edgy after a period of time of use.
It does not need to be concerned if that’s the situation with your miter saw. It’s not the last, after all! In this tutorial, we will go over the overall thing of sharpening the blades of a miter saw in this section.
Tools Required
A set of instruments for sharpening the miter saw blade will be required before you can begin the operation. One workbench with the clamps, crayon, and the diamond file is the three most critical items that you’ll need for this project. If you possess all of the necessary tools, the following suggestions will assist you in getting started:
Preparing the blade for removal
The initial thing one must do is detach the blade from its saw because it can never be sharpened when still attached. Once you remove its blade, position it on its clamps on the workbench to protect it.
Before you begin honing, label the blade’s teeth with a crayon, this will help you know where you are beginning from. If you do not, you will end up sharpening the very same teeth more than once.
Blade filing
Once you have finished the preliminary stages, the following step is to smooth the tooth of the blades one by one until they are smooth. Make a start at the lower front corner of the blade’s very first tooth with the diamond file and move its file forward as well as upward evenly along its edge as much as possible. The face of its file must be on its flatter side of the metal’s thickness when it is being used. Run the blade smoothly over its top flat area of a tooth, using a similar pattern as before. When you’re doing this, you shouldn’t put your finger on the point.
Repeat the 2nd step
Continue the filing on all of your teeth till you reach the tooth that was originally indicated. When sharpening its teeth, one should avoid making contact with the tips or edges of the tooth. As soon as you are finished with 1 side of its blade, flip it over and sharpen the second half by repositioning the blade over its clamps in the same manner as you performed with the 1st side. By the time you reach the teeth with the marking, you have finished the sharpening steps throughout the whole blade.
Conclusion
The following guide about how to sharpen your miter saw blades will help everyone, whether they are professionals or amateurs, or whether they are beginners or professionals. If you are a woodworker or a metalworker, you will come across this problem sooner or later. As a result, being prepared will be advantageous.
The method of sharpening the blade of a miter saw is uncomplicated and simple, as you have now learned. It takes only 15 minutes to complete. It is, on the other hand, a never-ending process. As previously said, the more you are using the saw, the rougher the blades will become as a result. Thus, you’ll have to sharpen its blades on a regular basis.
For More Miter Saw Visit Links Below: