How to use a Bow Saw? A Guide to the Right Method and Reasons to use

When it comes to working with power tools, most people think about a table saw, circular saw, miter saw, etc. In the crowded list of productivity cutting tools, the chances of ignoring the importance of a bow saw still lies there.

If you are looking forward to buying a bow saw and not sure that which one should be perfect, then you can look for a bow saw buying guide and gain the required knowledge about key components. For the first time use, it might seem difficult and the manual guide might be less handy.

Therefore, we are here with a quick guide to help you learn the right method to use a bow saw in the right manner along with some safety tips to ensure better productivity. Let us have a systematic approach –

How to use a Bow Saw

Step 1 – Install the right blade

A bow sawcan be used in the cutting of several types of material with ease. From cutting wood to PVC pipes, a bow saw will come in handy. With the wide variety of material, you also get blade options. There are several types of bow saw blade that you can use for an effortless experience. Choosing the right blade will come in handy. To cut wood and PVC pipes, a regular bow saw blade is reliable enough to make the job done.

Step 2 – Horizontal Sawing

If you are cutting wood, you should stand straight and take a position. Hold the saw at the right angle and ensure a perfect grip. Once you have the perfect grip, you can place the sharp blade on the wooden surface.

Step 3 – Lean forward

To make a perfect stroke, it is ideal to lean forward by bending at a small angle. You can apply more force and pressure by this method. After that place, the blade on the surface of the wood, start moving your hand in away from you and then toward you at a slow pace. Keep doing the same for a few seconds.

Step 4 – Clamping the material or wood

If you are working on a kerf, it is better to play your hand on it and holding it in position with a thumb. You will be able to keep the wooden kerf steady and applying force easily. The whole process takes a little time but once you practice the same thing several times, you will be good at holding the material with your hand. Make sure that you keep your hand at a little distance from the blade.

Step 5 – Use Strokes

With each stroke, you will be able to get the blade inside a kerf or the material of choice. You have to apply adequate pressure in the beginning so you don’t slip. Once you start getting into the wood, you can pull with extra pressure in a downward direction and vice versa. Keep on following the same move will help you cut through any material.

Step 6 – Ensure Safety

While cutting through any material, the sharp blade teeth of the bow saw will create wooden dust and it is harmful to breathe. The possible solution to this problem is wearing a mask, and covering your ear with earbuds. You can wear safety goggles to protect your eyes and having a clear view of the material. Keep sawing until you reach the end part and slow down when the wood is about to cut. Slowly apply pressure at the end position to make a firm cut.

Reasons to use a bow saw

Several reasons make a bow saw impressive in daily life for several tasks. If you are willing to buy a new bow saw, the below-given reasons will seem supportive to your decision –

  1. Easy to use

The bow saw is very light in weight you can use it with one hand.  It is very comfortable to use it does not require any electricity and any kind of chargeable battery. While work with a bow saw your hand does slip as it has a plastic handgrip. It does not require any type of experience to use. The bow saw is safer than other tools.

  1. More convenient and easily transported

Bow saw does not require any fuel or power to operate. You can use it where there is no electricity supply. It is also lighter in weight you can move from one place to another place easily. It is also an inexpensive tool you don’t have to spend more money on it. It is also not a dangerous tool.

  1. Usage

A bow saw is a tool used for cutting branches or firewood. It is used for straight and curved cuts. You have to push or pull the blade across the material. Bow saw is also used for gardening work. The blade of the bow saw is much wider than the coping saw. It cuts quicker and faster than coping saw.

Bottom Line

So, you can say that using a bow saw is easy and require fewer efforts than a regular blade. For small jobs where you can’t have power tools, using a bow saw will be a handy choice than using a normal hand saw. Make sure that you choose the right type of blade and right-sized bow saw which suit the job perfectly.

Reply