Using a regular saw to cut through wood is nice and simple, but requires plenty of effort and time. Using a regular saw in cutting hardwood is also less fascinating and such a sweating job. One might find it reliable but what to do if you want to cut in-between a board without cutting through any sides.
Cutting in the middle of a wooden board or hard material with no endpoint starts to require the use of professional tools. The most reliable solution is a reciprocating saw. It is an electronic machine with an ultra-sharp and strong blade moving front and back. Using a drill and a reciprocating saw can make you cut in the middle of any material.
From cutting down large wooden boards, small squares in the middle, or cutting plumbing pipes for replacement or any change, reciprocating saw seems like a handy choice. It has several adequate features to ensure that you have a smooth experience while working, and you can get additional features out of a reciprocating saw.
Guide To Use Reciprocating Saw Properly
However, using the reciprocating saw is slightly difficult and it might be risky if you don’t follow the right method. Here, we are mentioning the easy-to-follow guide with simple tips to make you have an excellent experience. Let’s get started –
1. Choosing the right blade
The very first thing to take into account is blade type. The market is flooded with a range of reciprocating saw blades and their types. A different type is based on the selected material in the base. Some blades have higher tensile strength and provide effective use but they are costly to consider. So, based on the type of work and the type of material you will be cutting, you can figure out the reciprocating blade through an online buying guide.
2. Install the Blade First
If you bought a new reciprocating saw, it would be an excellent choice to consider reading the manual guide to learn about important parts name. Once you know the name of each part, it will be easy for us to help you install a blade effectively. Right behind the blade, you can find a “Clamp screw” that you can easily tight or loose with a screwdriver. To install a blade, unscrew the clamp screw and put the new blade into a dedicated place firmly. After putting the blade, fasten the clamp screw and the blade is installed.
Note – Make sure that the reciprocating saw is not connected to a power source while changing the blade. Chances of pressing the switch while changing the blade are high and it might be risky also.
3. Adjusting the Shoe
In the front of a reciprocating saw, you can find a small plastic-shaped shoe that prevents the blade from going too deep and it is also helpful in going the extra inches while cutting. You can adjust the depth of the blade and spacing to have a perfect cut. You can rotate to loosen and then adjust the shoe according to your need. Manufacturers use their method to create a smart shoe for safety reasons. So, this feature might exist in many reciprocating saw and doesn’t in few. Going through the manual will be an effective choice.
4. Connect to power
Wear safety goggles and gloves to prevent wooden debris from going inside your eyes. You can use earbuds to prevent the wooden dust to enter your ears. Once you have connected to the power, it would be an adequate choice to have a test run on a small wooden board or any other material. You can ensure the stability of the shoe and the blade on the first try.
5. Marking the material
Based on what you want to cut using a reciprocating saw, you can mark with a temporary marker or pencil. You can make adjustments in the early stage and prepare the work surface for cut down. If you want to cut through a small wooden board, then it is important to clamp it for extra support. Make sure that you don’t hold the material in hand, it is risky and not recommended in any condition. After clamping the material, you are good to go.
6. Holding the reciprocating saw
It is an essential part of using every tool that you learn to hold the equipment and have a firm grip on it. While using a reciprocating saw, you can hold the handle firmly and have an adequate grip. If you are having an issue while holding the reciprocating saw, then wear gloves for extra safety.
7. Make Your First Cut wisely
For safety reasons, you should not use the reciprocating saw single-handed. Hold the equipment with both hands, go close to the cutting material and make your first cut now. Press the shoe and start cutting into the wooden board or any material you are opting for. If your grip is not adequate and you are having an issue holding the saw, leave the power button to turn it off and make the adjustment. Do not adjust while the machine is running.
Following the above-given easy-to-follow steps will help you have an easy experience while cutting down any material. You can use a reciprocating saw for anything but make sure that you use the right blade and choose a powerful machine based on the type of job.
- How to Use a Pole Saw?
- How to Use a Jig Saw?
- How to Use a Wet Tile Saw?
- How to use a Hand Saw?
- How to Use a Hole Saw?
- How to Use a Compound Miter Saw?
- How to use a Portable Band Saw?
- How To Use A Circular Saw Without A Table?
- How to Use a Chainsaw?
- How to use a Sliding Miter Saw?
- How to Use a Coping Saw?
- How to use a Bow Saw?
- How to use a Chop Saw?
- How to use a Miter Saw?
- How to Use a Circular Saw?
- How to Use a Scroll Saw?
- How To Use A Table Saw?