Reciprocating Saw Vs. Chainsaw: Which Is Better?

Given the numerous distinct varieties of saws available on the market, it is somewhat astonishing that so many new styles can perform the same basic job in such a diverse range of situations. Cutting wood into tiny chunks can be accomplished with a variety of different types of saws. As a matter of fact, you might be amazed at how comparable chainsaws & reciprocating saws could be utilized to accomplish identical jobs.

It’s not unusual to see experts who cut down & prune trees carrying both sorts of saws to them on their job sites. This is due to the fact that different tools are required for different activities, and chopping up wood is no exception to this.

Material compatibility: Reciprocating Saw Vs. Chainsaw

MaterialReciprocating SawChainsaw
Construction projectsYES
DemolitionYES
Garden workYES
MetalYESYES
AluminumYES

Point of differences: Reciprocating Saw Vs. Chainsaw

Reciprocating Saw Vs. Chainsaw

Power

It can be surely unsurprising to everyone that the chainsaw is the more potent of the two tools in question.

So, if the goal is to cut down a large tree, there is no purpose in utilizing a reciprocating saw because it will take far too long, and that is assuming that the saw would even be able to perform the task at hand.

At it comes to hefty trees, chainsaws are built to make rapid work of them and are especially effective when chopping through harder woods like oak.

However, mostly because this reciprocating saw may not be as powerful as the other saws do not imply that it will lose this round of competition. While it may not be the best choice for larger trees, it is ideal for little trees that can be wrapped around the palm of your hand.

As an added bonus, it is significantly safer because it goes off as soon as you release go of the power button. This implies that you may hold a tree including one hand to keep it stable while one cut it down without putting yourself or others in danger.

Price

A clear victor when it comes to cost is the reciprocating saw, which has a lower price than the other options. It is significantly less expensive, both to purchase and to operate.

Due to the fact that it is a larger piece of equipment with greater cutting power, the chainsaw is initially more expensive. The majority of chainsaws are available for purchase for less than $100.

On either hand, reciprocating saws are more suited for persons who do not want to cut down big trees on a daily basis. They are normally available for purchase for around $50.

Additionally, because they are typically battery-powered, you will not be required to purchase any lubricants for a reciprocating saw. It is possible, though, that you’ll need to be more cautious with your power bill because the battery will have to be recharged on a routine basis.

Materials

It has already been established that the chainsaw is required for removing a large tree from the ground or clearing land.

The teeth are razor sharp and highly rapid, making them excellent for cutting through the hardwood. Whenever you want to convert the trees into logs, it will be more convenient than if you wanted to change the logs in boards instead.

When it comes to lesser jobs, like chopping very thin trees, the reciprocating saw would be preferable. It’s also preferable if you wish to prune some twigs off a tree and make the fall season more pleasant.

It can also be more effective for slicing up boards than a chainsaw, which can sometimes result in a splintery mess when used for this purpose.

Accuracy

If you understand how to use a chainsaw properly, you can achieve surprising precision with it. All you have to do is make clear markings on the ground before you start cutting, and make sure you hold your chainsaw in the proper position.

It is essential to be precise when using a chainsaw; otherwise, the tree you are falling may not drop in the path that you intend it to fall in. When you’re cutting the wood into logs, you would like the sides to be as smooth and straight-looking as possible.

The chainsaw, on the other hand, can be extremely difficult to control when working with smaller trees and pieces of wood. This is especially true because some little trees may even bend as you begin to cut them with a chainsaw, rendering precision cutting nearly impossible.

If you’re using a chainsaw, it may also be hard to cut off little branches without slicing into many of the trunks of the trees in question. In such situations, a reciprocating saw should be employed.

Chainsaw

Chainsaw

Two major components of a chainsaw are a saw blade integrated into a chain that is wrapped around with a large metal guide bar or a compact one-cylinder gas (petrol) engine that powers the saw blade. In appearance, the chain is similar to a bicycle chain, as it runs around sprockets except that it has approximately 30 and so sharp teeth attached around it at regular intervals.

Pros

  • It is fast & powerful
  • It helps in cutting rough surfaces

Cons

  • Requires a lot of maintenance

Read Also: How To Sharpen a Chain Saw

Reciprocating Saw

Reciprocating Saw

Reciprocal saws (sometimes known as saber saws) are a type of reciprocating saw. But what exactly are they? Essentially, they are hand-held saws that take over, and when hammers & crowbars fail; they are used for demolition and construction operations.

Yes, that is the major application for a recip saw: cutting and ripping out the materials surrounding doors and windows, as well as cutting down joists and plasterboard, among other things. When it comes to upgrading doors and windows, one of the most time-consuming chores is removing the old fittings and replacing them with new ones.

Recip saws are capable of cutting through a wide range of materials, including wood, metal & plasterboard, and will be able to slice through whatever frames, walls, or fasteners you throw at them in a short period of time with relatively little effort.

Pros

  • The reciprocating saw is a lightweight,
  • Portable
  • Reasonably priced instrument that can be used for demolition, trimming, electrical, and cutting projects
  • If you’ve been undervaluing it in the past, it’s time to put that emotion to rest.

Cons

  • Not accurate enough

Also Read: How to Use a Reciprocating Saw?

Conclusion

A chainsaw is an excellent alternative for larger bits of wood when you don’t care about being clean or making a lot of noise, and you don’t care about being quiet or being neat.

Despite the fact that chainsaws are superior for big trees, branches, & pieces of wood when compared to reciprocating saws, it may not be the best choice for you based on your specific needs and circumstances. In regards to a saw, you should take into account a variety of elements depending on your needs now and tomorrow.

Despite the fact that both chainsaws & reciprocating saws are meant to cut wood & trees, there are important differences between these two types of tools. Understanding differences will assist you in making the most educated decision possible about which kind of saw is the greatest fit for your needs and circumstances

Related Topics:

Reply