Saw Tools Guide

Saw Tools Guide logo

Which Sliding Table Saw to Pick in 2023?

You must have heard or worked with different types of table saws but do not know what differentiates them from the Sliding Table Saw. Judging by the name, you may think of it as a table saw with a sliding table. A sliding table saw is virtually the same as a cabinet, stationary, large table saw. What differentiates them is replacing a sliding table instead of a static table on the left side of a blade. 

There are different types available in the market. Knowing the best to pick may be pretty challenging.

1. Shop Fox W1811 10-Inch 5 HP Sliding Table Saw

1 Shop Fox W1811 10-Inch 5 HP Sliding Table Saw

The primary use of the W1811 sliding table Saw is to rip and crosscut sheet stock or panels. With the W1811, it is easier and safer to slide a large workpiece through a cut. You can also operate as a conventional table saw for vast through-cut purposes. You can lock the sliding table as a traditional table saw, and the workpiece is then guided through the cut using the rip fence.

This 10-inch Sliding Table Saw, designed for cutting wide panels in small shops, includes a scoring blade to prevent cross-grain tear-out and a telescoping crosscut fence. i. it also has t two rock-solid flip stops, a fully adjustable miter fence with flip stop, a two-position extruded aluminum rip fence, a riving knife, and a large blade guard with an integral dust port. The 63-inch crosscut capability of this 10-inch table saw allows for fast trimming of all standard plywood panels to size. Accepts dado blades up to 13/16 inches wide or 10-inch saw blades with 5/8-inch arbor bores.

Products specification

  • Power source ‎5-horse-power
  • Weight 670 pounds
  • Blade length 3.13 inch
  • Cutting angle 90 degrees
  • Speed 3450 RPM


  • Easily movable  
  • Kerf thickness is easily adjusted


  • Complicated to assemble
  • Heavy to lift

2. Grizzly G0623X Sliding Table Saw, 10-Inch

Grizzly 10 inch G0623X Sliding Table Saw

The sliding table fully supports large panels, making ripping and crosscutting practically effortless. The scoring blade prevents tear-out for consistently factory-fresh edges, and the 4″ main port and 2-1/2″ port on the blade guard take care of dust control. This 10” sliding table Saw is convenient to use

Product specification

  • Power source ‎5-horse-power
  • Weight 572 pounds
  • Blade length 10 inch
  • Cutting angle 45 degrees
  • Speed 4000RPM


  • Table Extensions for comfortable Cutting of Large Panels
  • Magnetic Switch with Thermal Overload Protection


  • Heavy 
  • Expensive

3. SawStop 10-Inch Professional Cabinet Saw, TGlide Fence System

3 SawStop 10-Inch Professional Cabinet Sliding TableSaw

With the 36″ Prof. T-Glide Fence System and 3 HP Professional Cabinet Saw, SawStop spent numerous engineering hours ensuring nothing was being overlooked. Everything is engineered to offer repeated excellence, from correct vertical elevation to smooth repetitive cutting and the T-Glide Fence. However, this table saw is best if you are a professional.

Product specification

  • Power source ‎ ‎3-horse-power
  • Weight 555 pounds
  • Blade length 10 inch


  • It has a dust collection above the table
  • Control Box houses the on-off switch, power paddle, and on-board computer and checks if system work is reliable and safe


  • Low speed

4. SawStop TSA-SA48 Sliding Crosscut Table Attachment

4 SawStop Sliding Crosscut Table Attachment

This sliding table is designed to be adaptable. With the 55″ travel and 48″ crosscut capacity, you can micro-adjust for fine cuts and crosscut entire pages.

The fence spans 43″ and exceeds 58″, making it at least 15% bigger than regular crosscut sliders. You can modify this table can be to meet your needs. Magnified optics and large flip-stops with scales help assure precise, repeatable cuts every time.

Product specification

  • Power source ‎hand horse powered
  • Weight 87 pounds


  • Easy to move
  • Easily adjustable


  • Too light
  • Low speed

5. Powermatic Sliding Table Kit

5 Powermatic Sliding Table Kit

Sometimes we like to work from home, so you need this sliding table saw. Fit To Match the Needs of The Shop, At Home, Or in The Field Made to Withstand Even the Toughest Jobs Meeting or Exceeding All Required and Standardized. Testing tested and Proven to Function Under Real World Conditions. Used mainly by DIYS.

Product specification

  • weight 143 pounds
  • Materiasteel
  • Batteries no battery required 


  • You can use it in your homes or outside
  • Easy to assemble


  • Best for casual work
  • Lightweight

6. Grizzly Industrial G0699-12" 7-1/2 HP 3-Phase Sliding Table Saw with Scoring Blade Motor

6 Grizzly Industrial 3-Phase Sliding Table Saw

This 12″ Slider Table Saw has all the advantages of its 14″ larger brother, the G0493, including the incredible ability to crosscut or rip up to 126″. As a result, this Saw has the most extensive cutting capacity of any 12″ Sliding Table Saw. This Saw also incorporates a separate scoring blade motor, which enables the main motor to concentrate all of its power on cuts up to 3-5/16″ thick.

This table saw has the same features as every other superior sliding table saw. The Saw has a riving knife that goes up and down with the blade, a micro-adjustable rip fence for making traditional table saw cuts, and an extendable crosscutting fence made of extruded aluminum with two incredibly sturdy flip stops.

Product specification

  • Power source AC
  • Weight 1511 pounds
  • Blade length 5 inch
  • Speed 4000 RPM


  • Big cutting capacity
  • Strong


  • Can’t fit into small space
  • you can’t quickly move it around around

7. Grizzly Industrial G0764Z - 14" 10 HP 3-Phase Sliding Table Saw with 124" Cutting Capacity

Grizzly Industrial 3-Phase Sliding Table Saw

Leave it to Grizzly to provide another industrial-sized, large-sheet-material-capable sliding table saw. Using this Saw’s maximum depth of cut of 4-1/8″ at a 90° angle, you can cut very thick materials. 

Two flip stops on the crosscutting fence increase productivity, and the separately regulated scoring blade prevents tear-out. A 4″ dust port on the considerable overhead blade guard complements the 5″ dust port on the cabinet and is fully adjustable. Don’t look past this if you need a sizable table saw.

Product specification

  • Power source Ac/Dc 
  • Blade length 14 inch
  • Cutting angle 90 degrees


  • Can cut thick materials
  • Adjustable dust port


  • Small size

8. Grizzly Industrial G0820-12" 7-1/2 HP 3-Phase Compact Sliding Table Saw

8 Grizzly Industrial HP 3-Phase Compact Sliding Table

While sliding table saws are quick and comfortable, they may also take up a lot of space. What to do if shop space is limited? Look at the small G0820 12 “118” x 90″ sliding table saw, dimensions! With this slider, you can rip panels up to 33″ wide and crosscut sheets up to 63″ x 106-1/4″. ” Furthermore, despite its smaller size.

It has a scoring blade that prevents tear-out, a miter fence with adjustable flip-stops, dust ports up and down the blade, a riving knife, a standard rip fence, and a clamping hold-down system for the sliding table. This 7-1/2 HP workhorse has all the user-friendly features you’d expect from an industrial-duty sliding table saw. Every shop needs one of these for production ripping and crosscutting, and the G0820 might be the ideal option!

Product specification

  • Power source Ac/dc
  • Weight 996 pounds
  • Blade length 12 inch
  • Cutting angle 90 degrees


  • Strong
  • It has a scoring blade that eliminates tear-out


  • Heavy
  • Can’t fit in small space 

What to consider before buying a Sliding Table Saw ?

Before you purchase a sliding table saw, you should consider

  • Horsepower, because the horsepower in the table saw motor is the cutting power. The horsepower will determine the type of cut you get.
  • Blade size is essential in cutting, they come in various, but modern ones mostly come between 10 to 12 inches.  
  • The fence is usually adjustable. This is what holds the material while cutting. They are of two types the T- square fence and rack-and-opinion style fence.
  • Dust collection; if you are working in a poorly ventilated area, this will help keep you from inhaling dust and the air dust free.


You can consider this Table Saw as having a table saw with sliding table/feature. You can imagine the stress it will save you and the comfort that comes with it. Some also refer to the sliding table saw as the panel saw. This machine will save time and energy and increases productivity, especially when cutting through heavy duty material.  On a same but different note, if you’re still pondering whether yo buy a sliding table saw or a normal table saw, check-out some of our other articles on Hybrid Table Saws, Different Types of Table Saws and their uses, 10 Best Table Saws Review and lastly, 9 Best Jobsite Table Saw Reviews.



Scroll to Top